BODYTRONIC® 100 from medilogic

Foot health can be measured

BODYTRONIC 100
icon
Find Bauerfeind

The computer-aided Bodytronic 100 foot pressure measurement system identifies the individual load points of the foot quickly and accurately. The graphical image shows the status of the foot and the use of different colors allows the various load areas to be identified and interpreted easily. The result is that the best possible orthopedic foot orthoses and shoes can be selected for each individual. 

  • Accurate and rapid analysis of individual foot status – both static and dynamic measurement processes are available
  • Colored, graphical representation of the load areas under the foot
  • Increases the quality of orthopedic foot orthosis and shoe provision and meets the diagnostic requirements of modern occupational healthcare, accident treatment and sports medicine

Static foot pressure measurement

  • Measurement Technique
    To measure static foot pressure, the pressure distribution on the sole of the foot is calculated while standing and displayed graphically. To do this, the customer adopts a relaxed standing position while barefoot, with both feet on the measurement plate. Pressure sensors then capture the data and transmit it to the software. Additionally, information about the outline of the foot can also be captured and saved.

  • Analysis
    The calculated measurement values can be displayed using isobaric, sensor, or 3D representation. Pressure and load points are color-coded according to intensity. The color scale ranges from blue (low pressure) to red (high pressure).

Dynamic foot pressure measurement

  • Measurement Technique
    To measure dynamic foot pressure, the pressure distribution on the sole of the foot is calculated while walking and displayed graphically. To do this, the customer walks across the measurement plate twice, barefoot and at a normal speed, each time stepping on the measurement area with one foot. Pressure sensors then capture the data and transmit it to the software.
  • Analysis
    The calculated measurement values can be displayed using isobaric, sensor, or 3D representation. Pressure and load points are displayed graphically and color-coded according to their maximum and average intensity. The color scale ranges from blue (low pressure) to red (high pressure). Furthermore, it is also possible to analyze pressure point movement on a graph.